1. <label id="dm4id"></label>
      1. <bdo id="dm4id"></bdo>
        <dd id="dm4id"></dd>
        1. <progress id="dm4id"><tt id="dm4id"></tt></progress>

        2. <bdo id="dm4id"><strong id="dm4id"></strong></bdo>

          <bdo id="dm4id"><tt id="dm4id"></tt></bdo>
           

          產品中心

          多功能工具機

          0.00
          0.00
          產品型號:
          產品編號:
            


          主要規格和技術參數 
          車削
          AT320
          機身上最大工件回轉直徑
          320mm
          最大工件長度
          750mm
          刀架上最大回轉直徑
          200mm
          主軸通孔直徑 
          38mm
          主軸孔莫氏錐度
          NO.5
          刀架最大橫向行程
          150mm
          小刀架最大縱向行程 
          100mm
          加工公制螺紋種數
          21
          加工公制螺紋螺距 
          0.45-6mm
          加工英制螺紋種數
          28
          加工英制螺紋螺距
          5-48 1/n"
          主軸每轉刀架的縱向進給量
          0.01-1.5/r
          主軸每轉刀架的橫向進給量
          0.025-0.34/r
          尾架套筒的最大移動量
          80mm
          尾架內孔莫氏錐度
          NO.3
          主軸轉速級數
          12
          主軸轉速范圍
          60-1600r/min
          電機
          1.1kw

          鉆銑削
          AT320
          最大鉆孔直徑
          16mm
          鉆銑頭箱繞立柱回轉角度
          360
          主軸轉速級數
          4
          主軸轉速范圍
          260-2620r/min
          主軸孔莫氏錐度
          No.3 or R8
          電機
          0.37kw


          其他
          凈重 
          400kg
          外形尺寸
          1540*625*1750

          Features 

          ◆ Compact,versatile combination machine. 
          ◆ Adjustable height drill/mill head increases capacity. 
          ◆ Large MT5 spindle bore. 
          ◆ Large distance between center on longitudinal. 
          ◆ Fine feed handle and clutch for precision milling. 
          ◆ Headstock provides two step of feeds. 
          ◆ Spindle is supported by high precision bearing. 
          ◆ Headstock is constantly oiled during operation. 
          ◆ T-slot cross slide. 
          ◆ Adjustable gibs for the slideway. 
          ◆ Power longitudinal & cross feed. 
          ◆ Gearbox gets left and right hand threads to cut. 
          ◆ High precision chuck. 
          ◆ Equipped with emergency stop button. 
          ◆ A reversion switch is included for added versatility. 
          ◆ Tailstock may be offset for turning taper. 
          ◆ with the added control rod, it is easier to handle. 


          Gear drive power for lathe 
          It has 12-garde spindle gearshift for cutting, large spindle holes and large chuck 


          Threading Dial & Half Nut 
          It can be realized power feed on longitudinal or crosswise. 
          cut and chase threads like a master machinist. you can cut right and left-hand threads in metric and inch. with the added control rod, it is easier to handle. 


          Bi-directional power-feed 
          No stop to realized the functions of positive and negative on the lathe. leadscrew & crossfeed screw on both lathe and mill-yield finishes,highest quality work. 


          Gear drive power for mill & drill-It has 4 gearshift for drilling and milling. the drilling and milling head can work with angle changed  ? 


          Induction hardened, precision ground V-way bed 


          Quick Changeover & Two separate motors 
          Bigger mill clearance allows room for both lathe and mill setups without removing the lathe chuck. this machine is multi-purpose machine tool of bench type, it 
          is mainly used to lathe,drill and mill. which controlled by two motor 


          STANDARD ACCESSORIES 
          1. 3-jaw chuck 
          2. dead center 
          3. allen wrench 
          4. double open end wrench 
          5. chuck wrench 
          6. change gear 
          7. drill chuck 
          8. machine base 


          SPECIAL ACCESSORIES 
          1. turning tool set 
          2. steady rest 
          3. follow rest 
          4. machine vice 
          5. face mill cutter 
          6. face plate 
          7. back plate(φ160/φ200) 
          8. four-jaw chuck(φ160/φ200) 
          9. step block 
          10. rolling center

          產品詳情:
          久久费线观看2018,久久播视频这里只精,思思久久最新精品网